Line Marking, Surface Repair & Barrier Protection
Line marking, Surface maintenance and barrier protection installation utilising a network of approved contractors. Specialists in multiple site and high traffic volume environments.
Support when you need it most
OnDemand is a service brand provided by Meon Ltd, taking on responsibility for product specification, planning, and overseeing installation as a single central coordinator.
With over 26 years of experience working with both end-user clients and contractors, we have an immense level of knowledge to help provide the right solutions and oversee good practice on a variety of project types.
Line & Floor Marking
We have a full range of line marking solutions to suit all kinds of applications. To make it simpler we have grouped them into collections which are relevant to where the lines are being marked and what level of traffic they will be subjected to. Along with this, there is often a strong preference or stipulation that the product needs to be low odour so these options are collected together.
Surface Repair & Maintaince
Surface repairs often present operational challenges and we have worked with clients to develop a range which meets these challenges. The range is grouped into 3 specific areas of focus, repairing of potholes in roads and service yards, expansion joint repairs, and internal floor repairs.
Workplace Safety & Asset Protection
One of the most effective ways to protect your workforce and your built environment is to provide physical separation and delineation. The d-flexx range include a variety of olutions, all of which feedback into the overarching principle of protection.
Industry Pain Points
Poor Operational Efficiencies
Increase efficiency and effectiveness of business operations. Improve productivity with lean improvements to your worksite.
Loss of customer footfall
Reducing volumes of customers visiting your facility is causing concern, how can I make it more appealing for clients to keep returning.
Challenging Safety Scenarios
Mechanical handling equipment alongside humans is a dangerous combination and its important risks are minimised.
Recurring Site Disruption
Contractor onsite time can cause frustration and even pose extra health and safety risks, there are ways to reduce this.
Audit Compliance Concern
Ensure your site always looks ready for an inspection, sudden safety audits can catch busy sites off guard.
Maximising ROI
Ensure that your investment is getting return on investment, this may not be earning money but saving you spend more than you usually would.
Poor customer Experience
Customer experience is an important aspect in any business, ensuring you are doing everything to retain their loyalty and influence others.
Staff / Asset Protection Needs
Protecting staff / assets from injury or damage is the most important thing for any company and any failure can damage your brand or company.
Inefficient Space Usage
Increasing supply chain issues has made it very important to hold more stock, so getting more storage within the same space is key.
Why Choose Us
OnDemand can help you manage single large projects or multiple site projects, giving you consistent high level quality that ensures every project is aligned with your brand and safety requirements.
Project management can be anything ranging from; floor markings throughout your warehouse and outside areas; any surface repair defects you may have like crack repair or pothole repair, and most importantly; safety systems which include warehouse barriers and racking protection.
Using one contact point to give you peace of mind against any potential health and safety mishaps that may happen within your facilities and warehouse space around the UK and Ireland
Trusted for over 26 years
Supporting you to keep your site safe
Quality assurance from start to finish
National network of installers
Corporate and Socially Responsible
Improving your site efficiencies
Project consistency
Inhouse design team
Frequently Asked Questions
What is the minimum temperature I can lay product at?
Refer to TDS, as it varies across products. Typically 5°C for solvent-based & 10°C for water-based and solvent-free products.
Why is the air temperature in my warehouse or workshop important?
The drying & curing times we quote for our products are mostly based on an air temperature of 15°C. These times will approximately double for every 5°C drop in air temperature, cooler air can absorb less solvent, therefore lower temperatures will affect drying times.
Do you have paint I can use in a food prep area?
We recommend the use of water based paints, rather than solvent based, in food prep and storage areas, as this removes the risk of solvent taint to the foods. Be careful, as some water based paints have an ammonia content. Whilst this is a widely used ingredient in water based paints, it can set off ammonia detector alarms if they are fitted to your cooling system. Use an ammonia-free water based paint.
Can I use water-based in chill chambers, around 1-3°c?
Typically the answer is yes, as the chilling process tends to extract moisture from the air and creates a relatively dry atmosphere. The curing time will be extended, we recommend a test patch first to check.
Do you have paints that don't smell, as my staff are complaining?
Complaints about the smell of paint are common, and the smell is mostly due to the solvent used to keep the paint resin in solution. If the paint is being used in a large space such as a warehouse or factory, the actual risk to health is generally low. However, the perceived risk is high and the smell is unpleasant to some. We recommend the use of water-based paints; make sure they are ammonia-free or there may still be complaints about the smell of that!
Are your products slip resistant?
Yes, we do have products and additives which offer good slip resistance when applied correctly to suitable substrates. Typically SRV45 or more is considered suitable for medium risk areas such as walkways, rising to SRV65 or more for high risk areas such as High Friction Surfacing.
How to improve the loss of customer footfall & experience in car parks
Car parks are essential for allowing customers to access retail centres. So, when a parking facility is not running efficiently or safely, this can significantly impact customer experience and footfall. In this article, we will be looking at improving customer...
How frequently should your racking be inspected?
Damage to warehouse racking can raise your daily operational risk to threatening levels. It can quickly lead to a racking collapse, which would damage: Your stock or assetsFacility traffic or machineryYour facilities Infrastructure It would also result in isolating...
Buying & Installing Industrial Safety Bollards… Do’s & Don’ts
It’s imperative to ensure any busy industrial site is adequately protected from a range of current dangers. How do you find the right safety bollards for your needs, and how do you install them? This useful guide should help to explain the questions you might have....
Our Accreditations
Get Started Today
We recognise that a line or surface repair is not in itself a job but merely a way to achieve a larger requirement.
We work with end clients and asset owners to uncover this bigger picture, often around safety, productivity, audits, corporate look, footfall increase and the like to produce site design, recommend appropriate products and draft application instructions.